CareerExamPro

CompTIA SecOT+ (SOT-001) OT & ICS Security Exam (2026) practice test

11 practice questions for this exam, each with a full explanation and cited rule or blueprint reference.

Start practising

SecAI+, SecOT+, AAISM/AAIA & CMMC: practice drill

10 realistic exam questions, graded as you go, with the exact rule or statute citation for every answer. Start free, no sign-up.

Timed mock exam

11 questions in 13 minutes, drawn from every topic. No answers shown until the end, then a full score breakdown, your weakest topics and a review of what you missed.

Exam Snapshot & Official Blueprint

Official Exam Fee
$404–$425 (Pearson VUE — Launched Late 2026)
Format & Time Limit
MCQ + PBQ · Operational Technology & ICS Security
Passing Standard
Scaled score (CompTIA OT specialty)
Typical Prep Incumbents
Brand-new late-2026 launch — almost zero third-party study guides yet

Official Domain Breakdown

Exam DomainWeight
Purdue Model (Levels 0–5), OT/IT Convergence & Industrial DMZ (3.5)26%
ICS/SCADA Protocols (Modbus, DNP3, OPC-UA) & Passive Monitoring26%
IEC 62443 Zones/Conduits, NIST SP 800-82 Rev. 3 & Virtual Patching24%
OT Incident Response, Physical Safety (SIS) & Recovery24%

High-Yield Formulas, Statutes & Rules Cheat Sheet

Frequently Asked Questions

Why are candidates struggling to find CompTIA SecOT+ (SOT-001) practice tests?

Because SecOT+ launched in late 2026, traditional textbook publishers lag 6–12 months behind. CareerExamPro targets the exact Purdue, IEC 62443, and NIST SP 800-82 Rev. 3 blueprint.

Practice tests that prepare you for this exam

Practise by topic

About this exam

Agency / Issuer
CompTIA
Region
Global / Online

Exact question counts, passing scores, and allowed reference materials vary by testing window and state/agency. Always confirm current rules with the official testing provider.

Sample questions

A corporate ERP application in the Enterprise IT network (Purdue Level 4) requires near-real-time batch yield data from a manufacturing plant Historian (Level 3), while plant PLCs (Level 1) must stay isolated from corporate hosts. How does the Purdue Enterprise Reference Architecture secure this IT/OT boundary?

  1. Assign the ERP servers a secondary VLAN interface directly inside Level 1 so they can poll PLC registers without burdening the Level 3 Historian.
  2. Terminate IT and OT sessions at a Level 3.5 Industrial DMZ mirror so no direct routed path connects Level 4 to Level 3.
  3. Bridge Level 4 and Level 2 with a transparent Layer-2 switch and rely on corporate Windows Defender firewall rules to block unauthorized ERP ports.
  4. Migrate the Level 1 PLCs into a public cloud VPC at Level 5 so corporate ERP dashboards can query field actuators over standard HTTPS APIs.
Show the answer

B. Terminate IT and OT sessions at a Level 3.5 Industrial DMZ mirror so no direct routed path connects Level 4 to Level 3.

In the Purdue Model, Level 3.5 (the Industrial DMZ) acts as a mandatory buffer between Enterprise IT (Levels 4–5) and Manufacturing/Control Operations (Levels 0–3). Replicating Historian data into a Level 3.5 mirror ensures no direct network session spans from corporate IT into plant control zones.

Reference: CompTIA SecOT+ (SOT-001) / NIST SP 800-82 Rev. 3 (Purdue Model & Industrial DMZ)

A power generation station asserts that its SCADA network is 'air-gapped,' yet engineers routinely transfer PLC logic via uncontrolled USB drives and a dual-homed historian exports telemetry over corporate Ethernet. Which control physically enforces outbound-only telemetry export while preventing inbound cyber commands?

  1. A hardware unidirectional security gateway (optical data diode) with no return signal path, paired with a hardened removable-media scanning kiosk.
  2. A standard stateful next-generation firewall configured with an outbound-only ACL rule while keeping full bidirectional copper Ethernet cabling attached.
  3. A software VPN concentrator running TLS 1.3 between the dual-homed historian and corporate analytics servers over an untagged trunk port.
  4. A corporate NAC policy that assigns contractor USB flash drives a temporary guest IP address whenever plugged into engineering workstations.
Show the answer

A. A hardware unidirectional security gateway (optical data diode) with no return signal path, paired with a hardened removable-media scanning kiosk.

True air gaps rarely exist once transient USB media and dual-homed hosts appear. A hardware data diode uses a transmit-only LED and receive-only photodiode to physically eliminate any inbound return channel (unlike software firewalls that can be misconfigured or exploited), while a kiosk sanitizes removable media.

Reference: CompTIA SecOT+ (SOT-001) / NIST SP 800-82 Rev. 3 (Unidirectional Security Gateways)

An OT network sensor inside a municipal water plant alerts on cleartext Write Single Coil (FC 05) and Write Multiple Registers (FC 16) packets sent over TCP port 502 to a chemical dosing PLC from an unauthorized maintenance laptop. Which legacy protocol is observed, and why could the laptop issue commands without logging in?

  1. OPC-UA over TCP 502; the laptop bypassed login because OPC-UA disables X.509 certificate verification whenever coils are written sequentially.
  2. DNP3 over TCP 502; the laptop bypassed login because DNP3 automatically trusts RFC 1918 industrial subnets.
  3. Modbus TCP; it lacks native authentication, encryption, or integrity checks, requiring zone segmentation and protocol allowlisting.
  4. BACnet/IP over TCP 502; the protocol transmits cleartext Kerberos tickets that any workstation on the same broadcast domain can trivially replay.
Show the answer

C. Modbus TCP; it lacks native authentication, encryption, or integrity checks, requiring zone segmentation and protocol allowlisting.

Modbus TCP operates on TCP port 502 and uses function codes such as FC 05 (Write Single Coil) and FC 16 (Write Multiple Registers) with zero built-in authentication or encryption. Defense relies on strict zone segmentation, IP allowlisting, and OT protocol-aware firewall inspection.

Reference: CompTIA SecOT+ (SOT-001) / Modbus TCP Specification & NIST SP 800-82 Rev. 3

Taking this exam soon?

Tell us which exam domains or calculation drills you want more practice on.

Other 2026 AI Security, OT & CMMC exams